1. Data Management
  2. Data Quality Studio
  3. Set up data quality policies
  4. Set up data quality policy versions
  5. Set up enrichment rules

Set up enrichment rule of type Enable/Disable

Use enrichment rules to set field values and behavior in D365 F&SCM.

To set a field value or behavior, you can use several value types. This topic explains how to set up an enrichment rule line of type Enable/Disable.

Use an Enable/Disable enrichment rule line to disable or enable a field based on the value of another field.

Usually, for an an enrichment rule of type Enable/Disable, you apply:

  • The 'Source field modified' event.
  • A condition to define for which value of another a field is enabled or disabled.

Note:

  • For a specific field, you can only set up one enrichment rule line for each enrichment rule.
  • If you set up an enrichment rule with a line to disable a field, you must also set up an enrichment rule with a line to enable the field.

Example:

This example explains how you can apply an enrichment rule line of type Enable/Disable. As an example, the credit rating of a customer is used.

Credit rating Credit limit (value) Credit limit (enabled/disabled?)
'Poor' Default set to '1000' Disabled
Other than 'Poor' Not set Enabled

For this example, three enrichment rules are required, each with an enrichment rule line on the Credit limit field:

Enrichment rule Enrichment rule line Condition
Table Event Source field Target datasource Target field Value type Value Form Enable field  
CustTable Source field modified Credit rating CustTable Credit limit Fixed value 1000 - - Enrichment rule is applied only if the Credit rating field is set to 'Poor'.
CustTable Source field modified Credit rating CustTable Credit limit Enable/Disable - CustTable No Enrichment rule is applied only if the Credit rating field is set to 'Poor'.
CustTable Source field modified Credit rating CustTable Credit limit Enable/Disable - CustTable Yes Enrichment rule is applied only if the Credit rating field is set to another value than 'Poor'.


Data quality administrator Data quality administrator The data quality administrator (DQSDataQualityAdministrator) can set up and maintain: Data quality policies Data quality studio parameters Data quality studio general setup Start Start Create enrichment rule Create enrichment rule Use enrichment rules to set field values in D365 F&SCM. This topic explains how to create an enrichment rule. Procedure 1. Click Data quality management. 2. On the Data quality policies tab, in the list, click the link of the desired data quality policy. 3. Click the Enrichment rules tab. Note: If you want to edit another data quality policy version than the currently shown version, first select the desired version. To do so, on the Action Pane, on the Version tab, click Versions. On the dialog, select the desired version and click OK. 4. Click Add. 5. In the Table field, enter or select a value. 6. In the Event field, select an option. 7. In the Source field field, enter or select a value. Use a different target  datasource than the  source datasource? Use a different target  datasource than the  source datasource? Set up target datasource Set up target datasource For an enrichment rule, you can set a field value in a target table that is different from the source table. As a target  table, you can only use a table that is related to the source table. Set up the tables that you want to use as target table for the enrichment rule. Note: On creation of an enrichment rule, automatically, the source table is added as target table. Procedure 1. Click Data quality management. 2. On the Data quality policies tab, in the list, click the link of the desired data quality policy. 3. Click the Enrichment rules tab. 4. In the list, find and select the desired enrichment rule. 5. Click Target datasource. 6. Click New. 7. In the Relation name field, enter or select a value. 8. In the Table name field, enter or select a value. 9. In the Query field, enter or select a value. 10. For an enrichment rule, you can use 'key-field' enrichment lines to identify records in the target datasource. The 'key-field' enrichment lines setup defines to which target datasource records the enrichment rule applies. Click Create key fields. Note: If you do not want enrichment lines marked as key fields, you can remove the 'key-field' enrichment lines. To do so, click Remove key fields. 11. Close the page. Set up enrichment rule of type Enable/Disable Set up enrichment rule of type Enable/Disable For an enrichment rule, use an enrichment rule line to set a field value or behavior. To set a field value or behavior, you can use several value types. Use the value type Enable/Disable to enable or disable a field based on the value of another field. Procedure 1. Click Data quality management. 2. On the Data quality policies tab, in the list, click the link of the desired data quality policy. 3. Click the Enrichment rules tab. 4. In the enrichment rules list (left pane), find and select the desired enrichment rule. Note: Usually, an enrichment rule is used which Event field is set to ´Source field modified´. 5. Sub-task: Manually create enrichment line. 6. In the Enrichment lines section, click Add. 7. In the Target data source field, enter or select a value. 8. Define the target datasource field which value must be set. In the Target field field, enter or select a value. Note: If the enrichment line is marked as 'key-field' or 'has-relation', the target field is used to define to which target datasource records the enrichment rule applies. In tis case, the target field value is not set. 9. Sub-task: Create enrichment lines by selecting fields. 10. In the Enrichment lines section, click Select fields. 11. Open the page from which you want to select fields. 12. On the Field picker dialog, click Select fields. 13. Click the '+' button for each field that you want to select. 14. On the Field picker dialog, click Done. 15. On the Field picker dialog, click Submit to save the selected fields to the validation rule. 16. In the Value type field, select 'Enable/Disable'. 17. Select or clear the Has relation check box. 18. In the Details section, in the Form name field, enter or select a value. 19. In the Enable field, select the desired option. 20. Close the page. Set up enrichment rule conditions

Set up enrichment rule conditions

For each enrichment rule, you can set up conditions. The enrichment rule is only applied if the conditions are met.

To define an enrichment rule condition, you use a query. The enrichment rule is applied only to the records that are found by the query.
You can use these types of queries:
  • Inquiry: Use the standard D365 F&SCM Inquiry (SysQueryForm) page to define the records to which the enrichment rule applies. The inquiry only queries the table as defined for the enrichment rule.
  • Dynamic query: Use a dynamic query to define the records to which the enrichment rule applies. Before you can set up a condition with a dynamic query, set up the dynamic query to be applied. You can use a dynamic query, for example, to query other tables than the enrichment rule table, to define table relations, and to have only one record returned.

 End End Yes No

Activities

Name Responsible Description

Create enrichment rule

Data quality administrator

Use enrichment rules to set field values in D365 F&SCM.

This topic explains how to create an enrichment rule.

Set up target datasource

Data quality administrator

For an enrichment rule, you can set a field value in a target table that is different from the source table.

As a target  table, you can only use a table that is related to the source table.

Set up the tables that you want to use as target table for the enrichment rule.

Note: On creation of an enrichment rule, automatically, the source table is added as target table.

Set up enrichment rule of type Enable/Disable

Data quality administrator

For an enrichment rule, use an enrichment rule line to set a field value or behavior.

To set a field value or behavior, you can use several value types. Use the value type Enable/Disable to enable or disable a field based on the value of another field.

Set up enrichment rule conditions

Data quality administrator

For each enrichment rule, you can set up conditions. The enrichment rule is only applied if the conditions are met.

To define an enrichment rule condition, you use a query. The enrichment rule is applied only to the records that are found by the query.
You can use these types of queries:
  • Inquiry: Use the standard D365 F&SCM Inquiry (SysQueryForm) page to define the records to which the enrichment rule applies. The inquiry only queries the table as defined for the enrichment rule.
  • Dynamic query: Use a dynamic query to define the records to which the enrichment rule applies. Before you can set up a condition with a dynamic query, set up the dynamic query to be applied. You can use a dynamic query, for example, to query other tables than the enrichment rule table, to define table relations, and to have only one record returned.

Provide feedback