1. Data Management
  2. Data Quality Studio
  3. Flows

Set up enrichment rule conditions
Activity Flow

For each enrichment rule, you can set up conditions. The enrichment rule is only applied if the conditions are met.

To define an enrichment rule condition, you use a query. The enrichment rule is applied only to the records that are found by the query.
You can use these types of queries:
  • Inquiry: Use the standard D365 F&SCM Inquiry (SysQueryForm) page to define the records to which the enrichment rule applies. The inquiry only queries the table as defined for the enrichment rule.
  • Dynamic query: Use a dynamic query to define the records to which the enrichment rule applies. Before you can set up a condition with a dynamic query, set up the dynamic query to be applied. You can use a dynamic query, for example, to query other tables than the enrichment rule table, to define table relations, and to have only one record returned.

Data quality administrator Data quality administrator The data quality administrator (DQSDataQualityAdministrator) can set up and maintain: Data quality policies Data quality studio parameters Data quality studio general setup Start Start Use new dynamic query in  action rule condition? Use new dynamic query in  action rule condition? Set up dynamic query

Set up dynamic queries

Use a dynamic query to find one or more records in the database. The found records are the input for further processing.

You can use a dynamic query on:

  • An enrichment rule of type Data query.
  • An action rule of type Data query.
  • A condition that is applied to a validation rule, duplicate check rule, or action rule.
  • A configurable lookup of type Dynamic query. You can apply the configurable lookup on a validation rule of type Configurable lookup.

To define a query range, you can use a function.

 Set up enrichment rule conditions Set up enrichment rule conditions For each enrichment rule, you can set up conditions. The enrichment rule is only applied if the conditions are met. To define an enrichment rule condition, you use a query. The enrichment rule is applied only to the records that are found by the query. You can use these types of queries: Inquiry: Use the standard D365 F&SCM Inquiry (SysQueryForm) page to define the records to which the enrichment rule applies. The inquiry only queries the table as defined for the enrichment rule. Dynamic query: Use a dynamic query to define the records to which the enrichment rule applies. Before you can set up a condition with a dynamic query, set up the dynamic query to be applied. You can use a dynamic query, for example, to query other tables than the enrichment rule table, to define table relations, and to have only one record returned. You can set up several conditions, using different query types. Procedure 1. Click Data quality management. 2. On the Data quality policies tab, in the list, click the link of the desired data quality policy. 3. Click the Action rules tab. Note: If you want to edit another data quality policy version than the currently shown version, first select the desired version. To do so, on the Action Pane, on the Version tab, click Versions. On the dialog, select the desired version and click OK. 4. In the list, find and select the desired action rule. 5. Click the Conditions tab. 6. Sub-task: Set up a condition using an inquiry. 7. Click Add. 8. In the Condition ID field, type a short descriptive name for the condition. 9. Click Save. 10. Click Edit query. 11. In the Criteria field, type a value. Note: You can extend the inquiry setup as desired. 12. Click OK. 13. Sub-task: Set up a condition using a dynamic query. 14. Click Add. 15. In the Condition ID field, type a short descriptive name for the condition. 16. In the Query type field, select 'Dynamic query'. 17. Usually the dynamic query is already set up. Select the applicable dynamic query. In the Dynamic query field, enter or select a value. Note: - If selected, you can review or edit the query by clicking Edit query. - If you do not select a dynamic query and you click Edit query, you can create a new dynamic query using the wizard. 18. Sub-task: Make condition active. 19. To apply a condition, make it active. Select the Active check box. Note: You can also make all conditions for a duplicate check rule active in one go. To do so, click Make all active. 20. Close the page. Notes If you define a condition and the applicable table for the rule is a date-effective or inheritance table, additional setup is required. The applicable table for the rule must be mapped to a related staging table or temporary table. End End Yes No

Activities

Name Responsible Description

Set up dynamic queries

Data quality administrator

Use a dynamic query to find one or more records in the database. The found records are the input for further processing.

You can use a dynamic query on:

  • An enrichment rule of type Data query.
  • An action rule of type Data query.
  • A condition that is applied to a validation rule, duplicate check rule, or action rule.
  • A configurable lookup of type Dynamic query. You can apply the configurable lookup on a validation rule of type Configurable lookup.

To define a query range, you can use a function.

Set up enrichment rule conditions

Data quality administrator

For each enrichment rule, you can set up conditions. The enrichment rule is only applied if the conditions are met.

To define an enrichment rule condition, you use a query. The enrichment rule is applied only to the records that are found by the query.
You can use these types of queries:
  • Inquiry: Use the standard D365 F&SCM Inquiry (SysQueryForm) page to define the records to which the enrichment rule applies. The inquiry only queries the table as defined for the enrichment rule.
  • Dynamic query: Use a dynamic query to define the records to which the enrichment rule applies. Before you can set up a condition with a dynamic query, set up the dynamic query to be applied. You can use a dynamic query, for example, to query other tables than the enrichment rule table, to define table relations, and to have only one record returned.
You can set up several conditions, using different query types.

Activities

Name Responsible Description

Set up dynamic queries

Data quality administrator

Use a dynamic query to find one or more records in the database. The found records are the input for further processing.

You can use a dynamic query on:

  • An enrichment rule of type Data query.
  • An action rule of type Data query.
  • A condition that is applied to a validation rule, duplicate check rule, or action rule.
  • A configurable lookup of type Dynamic query. You can apply the configurable lookup on a validation rule of type Configurable lookup.

To define a query range, you can use a function.

Set up enrichment rule conditions

Data quality administrator

For each enrichment rule, you can set up conditions. The enrichment rule is only applied if the conditions are met.

To define an enrichment rule condition, you use a query. The enrichment rule is applied only to the records that are found by the query.
You can use these types of queries:
  • Inquiry: Use the standard D365 F&SCM Inquiry (SysQueryForm) page to define the records to which the enrichment rule applies. The inquiry only queries the table as defined for the enrichment rule.
  • Dynamic query: Use a dynamic query to define the records to which the enrichment rule applies. Before you can set up a condition with a dynamic query, set up the dynamic query to be applied. You can use a dynamic query, for example, to query other tables than the enrichment rule table, to define table relations, and to have only one record returned.
You can set up several conditions, using different query types.
Related to Notes

Set up enrichment rule conditions

 		 

Provide feedback