1. Data Management
  2. Data Entry Workflow
  3. Activities

Configure step with wizard - Vendor
Application task

In D365 FO, the vendors setup has a complex data model and several related forms.

With the Configure data entry workflow template wizard, you can configure a data entry workflow template to set up vendors. You can use the wizard to configure an existing step.

You can split the vendor setup over several steps. For each step, you can use the wizard to configure the desired step field groups.

For example, split the vendor setup over these steps:

  • Create vendor: Used to enter the main data of a vendor.
  • Enter vendor addresses: Used to enter the address information of the vendor.
  • Enter vendor contacts: Used to enter the contact information of the vendor.

Result

When you finish the wizard, based on your selections:

  • The workflow document is created or updated. Note: The workflow is created only the first time you use the wizard for a data entry workflow template.
    In the workflow document:
    • For each applicable table, a record is added.
    • To each record, all fields of the related table are added.
    • All required table relations and field relations are set up.
  • The selected field groups are added to the data entry workflow template. The field groups are added to the automatically created tab group of the configured step,
  • To each added field group, the main fields are added.


Standard procedure

1. Go to Data entry workflow > Design > Data entry workflow templates.
2. In the list, click the link of the desired data entry workflow template.
3. Click Edit.
4. In the Workflow diagram section, select the desired data entry step.
5. Click Configure step.
6. Sub-task: Select template type.
  6.1 In the Template accelerator type field, select 'Vendor'.
 

Note: If you already used the wizard for the data entry workflow template, the wizard step to select a template type is skipped. If this case, the wizard is started in 'vendor' mode.
  6.2 Click Next.
7. Sub-task: Select the vendor setup elements that you want to add to the data entry workflow step.
  7.1 The first time you use the wizard for a vendor data entry workflow template, the Vendor main data must be included.
Also, if you did not select all vendor main data elements earlier, and you want to add these now, include the Vendor main data.
  Select Yes in the Vendor main data field.
 

Note: If you click Next, the Vendor main data page is added to the wizard.
  7.2 You can add the address information fields.
  Select Yes in the Vendor address information field.
 

Note: If you click Next, the Vendor address information page is added to the wizard.
  7.3 You can add the vendor contact information fields.
  Select Yes in the Vendor contact information field.
 

Note: If you click Next, the Vendor contact information page is added to the wizard.
  7.4 You can add the vendor contact person fields.
  Select Yes in the Vendor contact person field.
 

Note: If you click Next, the Vendor contact person information page is added to the wizard.
  7.5 You can add the vendor bank account fields.
  Select Yes in the Vendor bank accounts field.
 

Note: If you click Next, the Vendor bank account information page is added to the wizard.
  7.6 Click Next.
8. Sub-task: Select the desired vendor main data elements.
  8.1 Indicate if the data entry workflow is used to set up vendors of type Organization or Person.
In D365 F&SCM, these types use a different set of tables. Only the applicable tables are added as records to the workflow document.
  In the Vendor template type field, select an option.
  8.2

Add the Details field group to the first step of the data entry workflow template with these fields:

  • Vendor account
  • Name
  • Group
  • Currency
  • Terms of payment
  • Delivery terms
  • Mode of delivery
  Select Yes in the Identification field.
  8.3

You can add the Credit limit field group to the data entry workflow template step with these fields:

  • Credit rating
  • Credit limit
  Select Yes in the Credit information field.
  8.4

You can add the Tax information field group to the data entry workflow template step with these fields:

  • Sales tax group
  • Tax exempt number
  Select Yes in the Tax information field.
  8.5 Click Next.
9. Sub-task: Define the vendor address information setup.
  9.1 During data entry of address information, it can be needed to define the address purpose.
You can add the Purpose field to the data entry workflow template step.
  Select Yes in the Purpose field field.
  9.2 In the Available list, select the desired address elements for the data entry workflow template step.
 

Note: Select at least one address element.
  9.3 Click Add (->).
  9.4 Click Next.
10. Sub-task: Define the vendor contact information setup.
  10.1 The default display mode for the contact information fields is 'Grid'. In this case, the Contact information field group is added to the data entry workflow template step. On the workflow task dialog, you can enter several contact information lines in one grid.
You can choose to show the fields as individual fields on the workflow task dialog. In this case, for each contact type, a separate field group is added to the data entry workflow template. On the workflow task dialog, for each contact type, you can enter only one contact information line.
  Select Yes in the Individual fields field.
 

Note: If you choose to show individual fields, select the desired contact information fields.
  10.2 If you choose to show individual fields, you can add the Phone contact information fields to the data entry workflow step.
As a result, the 'Contact information - phone' field group is added to the data entry workflow template step.
  Select Yes in the Phone field.
  10.3 If you choose to show individual fields, you can add the Email contact information fields to the data entry workflow step.
As a result, the 'Contact information - email' field group is added to the data entry workflow template step.
  Select Yes in the Email field.
  10.4 If you choose to show individual fields, you can add the Fax contact information fields to the data entry workflow step.
As a result, the 'Contact information - fax' field group is added to the data entry workflow template step.
  Select Yes in the Fax field.
  10.5 During data entry of contact information, it can be needed to define the contact information purpose.
You can add the Purpose field to the data entry workflow template step.
  Select Yes in the Purpose field field.
 

Note:

If you show the contact information fields:

  • In a grid, the purpose field is added to the grid.
  • As individual fields, a separate purpose field is shown for each selected contact information field.
  10.6 Click Next.
11. Sub-task: Define the contact person information setup.
  11.1

If you add Contact person field group to the data entry workflow template step, these fields are always added:

  • Mandatory contact person fields.
  • Several contact person employment information fields.

You can add the Phone field to the data entry workflow step.

As a result, the 'Contact person contact information - Phone' field group, with the Phone field, is added to the data entry workflow template step.
  Select Yes in the Phone field.
  11.2

You can add the Email field to the data entry workflow step.

As a result, the 'Contact person contact information - Email' field group, with the Email field, is added to the data entry workflow template step.
  Select Yes in the Email field.
  11.3

You can add the Fax field to the data entry workflow step.

As a result, the 'Contact person contact information - Fax' field group, with the Fax field, is added to the data entry workflow template step.
  Select Yes in the Fax field.
  11.4

You can add the Fax field to the data entry workflow step.

As a result, the 'Contact person contact information - Fax' field group, with the Fax field, is added to the data entry workflow template step.
  Select Yes in the Address field.
 

Note: If you select Yes, select the desired address fields in the next steps.
  11.5 In the list, find and select the desired record.
  11.6 Click Add (->)
  11.7 Click Next.
12. Sub-task: Define the bank account information setup.
  12.1

If you add vendor bank account information elements to the data entry workflow template step, the bank account grid is always added. The bank account grid has several general bank account fields to identify the bank account.

You can add bank detail information to the data entry workflow step.
  Select Yes in the Bank details field.
  12.2 Click Next.
13. Click Finish.

Notes

Where desired, you can modify the generated data entry workflow template setup. For example, you can:

  • Select step fields from the desired pages. Note: If you do so, in this case, the workflow document is not updated.
  • Add additional fields from the workflow document.
  • Add tab pages.
  • Move a field group to another tab page using the Cut and Paste options.
  • Set up conditions.

Related to Notes

Set up workflow template step - Data entry

 		 

See also

Provide feedback