--- title: "Create time and consumption based plan" slug: "create-time-and-consumption-based-plan" description: "Create a maintenance plan using time and consumption-based triggers to streamline work orders and optimize intervals for efficient management." tags: ["Task", "Rental Management", "RM"] updated: 2026-03-23T10:24:03Z published: 2026-03-23T10:24:03Z canonical: "docs.staedean.com/create-time-and-consumption-based-plan" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.staedean.com/llms.txt > Use this file to discover all available pages before exploring further. # Create time and consumption based plan Create a maintenance plan that uses both time-based and consumption-based triggers. Use the setting Both time and consumption-based to align both cycles under one plan. Either trigger can initiate the same maintenance work order, and both intervals are updated together. Example scenarios: - **Consumption-based**: 200 hours, Time-based: 14 days. If 210 hours are registered, a work order is created. After completion, both intervals are updated. - If 14 days pass and trigger a new work order, both intervals are updated after completion. - If due at 210 hours, only the consumption interval is updated. The time interval stays unchanged. - If due at 14 days, only the time interval is updated. After completion, the consumption interval is updated. In the consumption-based section of the plan, you can set: - **Recurrence**: Define the meter value that triggers a work order. - **Unit**: Choose the unit of measure, such as hours. - **Expect every**: Prevent work order creation at specified meter intervals, such as every 20,000 units. In the **time-based** section, define a time recurrence pattern, such as every two months. Set the reset strategy to recalculate the next maintenance date. You can configure how the next interval is calculated: - **When due**: The next maintenance date is based on the recurrence pattern, regardless of when it is actually completed. - **On completion**: The next date is calculated only after the work order is completed. Use this if maintenance can be delayed and future cycles should shift accordingly. ### Steps 1. Go to **Business objects** > **Setup** > **Service and maintenance** > **Default maintenance plans**. 2. Click **New**. 3. In the **Maintenance plan code** field, type a value. 4. In the **Description** field, type a value. 5. In the **Maintenance plan type** field, select '**Time and consumption based**'. 6. Expand the **General** section. 7. In the **Work order template ID** field, enter or select a value. 8. In the **Main task** field, enter or select a value. 9. Select **Yes** in the **Warn when due** field. > [!NOTE] > **Note** > > Skip the step if a warning is not required. 10. In the **Reset** field, select '**On completion**'. 11. Click **Enter recurrence**. 12. In the **PatternUnit** field, select an option. 13. Select the time pattern. 14. Click **OK**. 15. In the **Recurrence** field, enter a number. 16. In the **Unit** field, enter or select a value. 17. Click **Save**. ## Related - [Create default maintenance plan](/create-default-maintenance-plan.md)