---
title: "Test web service configuration"
slug: "test-web-service-configuration"
description: "Test your web service configuration by defining request and response parameters, executing tests, and analyzing results for effective data quality management."
tags: ["Task topic"]
updated: 2026-03-20T08:47:53Z
published: 2026-03-20T17:44:40Z
canonical: "docs.staedean.com/test-web-service-configuration"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.staedean.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Test web service configuration

You can test a web service configuration.

When you test the web service configuration, this is tested:

- Connection to the web service.
- Request that is sent to the web service.
- Response that is received from the web service.

### Steps

1. Click **Data quality management**.
2. Click **Web services**.
3. In the list, find and select the desired web service.
4. Expand the **Web service** test section.
5. Click **New**.
6. In the **Test scenario name** field, type a value.
7. Define the expected result of the test.

You can indicate if you expect the test to pass or to fail.

In the **Expected** field, select an option.
8. Click **Save**.
9. Sub-task: Configure the web service test.
  1. Click **Setup** test.
  2. Define the request parameters that you want to use for the test.

In the **Request parameters** section, click **Add**.
  3. In the **Parameter name** field, enter or select a request parameter.
  4. Define the test value for the request parameter.

In the **Parameter value** field, type a value.
  5. Define the response parameters that you want to use for the test.

In the **Expected response** section, click **Add**.
  6. In the **Parameter name** field, enter or select a response parameter.
  7. Define the condition that the response value must meet to pass or fail the test.

In the **Condition type** field, select an option.
  8. In the **Parameter value** field, type the condition value with which the response value must be compared.
  9. Click **Close**.
10. Test the web service configuration.

Click **Execute test**.

> [!NOTE]
> Note
> 
> As a result of the test, these fields are set:
> 
> - **Actual**: Indicates if the test passed or failed. You can compare this with the defined expected result.
> - **Last run date time**: The date and time the test was last done.
11. Sub-task: Analyze web service test response.
  1. The last web service response is stored. You can analyze it, for example, if the expected test result and actual test result are different.

Click **Web service response**.

> [!NOTE]
> Note
> 
> The web service response is shown in XML format.
  2. Click **Close**.
12. Close the page.

## Related

- [Set up web service configuration](/set-up-web-service-configuration-enrichment.md)