---
title: "Set up Data Quality Studio"
slug: "bc-set-up-data-quality-setup"
description: "Enable Data Quality Studio in D365 BC by configuring the Data Quality Setup page and toggling the Data Quality Check for effective validation and duplicate checks."
updated: 2026-08-05T06:04:35Z
published: 2026-08-05T06:04:35Z
canonical: "docs.staedean.com/bc-set-up-data-quality-setup"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.staedean.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Set up Data Quality Studio

The **Data Quality Setup** page is the global switch for Data Quality Studio in D365 BC. The **Data Quality Check** toggle must be enabled before Anywhere Mobility Solutions validation rules or duplicate checks are evaluated. This page also holds the number series used to generate unique identifiers for conditions and duplicate check records.

**Purpose:** Enable Data Quality Studio globally and verify that the required number series are configured. No Data Quality Studio functionality is active until the toggle on this page is turned on.

### **Steps**

1. Press **Alt+Q** to open the Tell Me search.
2. Type **Data Quality Setup**.
3. Select **Data Quality Setup** from the results under **Administration**. The **Data Quality Setup** page opens.
4. In the **General** section, locate the **Data Quality Check**.
5. Turn on the toggle.

> [!NOTE]
> **Note** When this toggle is off, the entire Data Quality Studio functionality is disabled system-wide. No validation rules or duplicate detection checks will be triggered, regardless of the policy configuration.
6. In the **Number Series** section, confirm that values are assigned to the following fields:

| **Field** | **Description** |
| --- | --- |
| **Validation Condition ID** | Number series for condition identifiers on validation rules |
| **Duplicate Condition ID** | Number series for condition identifiers on duplicate check rules |
| **Duplicate Check Nos** | Number series for duplicate check record IDs |
7. In the **Number Series** section, make sure values are assigned to all required fields. If number series are not yet created in your environment, create them first and then assign them in **Data Quality Setup**. If your organization requires custom number series, click the lookup on each field and select the appropriate series.

> [!NOTE]
> Note
> 
> Select **Save** icon or navigate away. D365 BC saves pages automatically on field exit.

### **Example - Standard Setup**

Use this configuration for a typical new setup:

| **Field** | **Value** |
| --- | --- |
| Data Quality Check | Enabled (on) |
| Validation Condition ID | Assigned |
| Duplicate Condition ID | Assigned |
| Duplicate Check Nos | Assigned |

Make sure all required number series are created and assigned before you continue with policy configuration. Enable the toggle, leave the number series as-is, and then create policies.

> [!NOTE]
> **Warning** Do not disable the **Data Quality Check** toggle on a live system without first communicating the impact. Disabling it immediately stops all rule evaluation, including validations that users depend on for data entry guidance.